Electric Scooters for Rough Roads in Africa: What Dealers Should Test Before Ordering
Paved showroom roads prove nothing. How African dealers should test a sample on dust, potholes and unpaved roads before ordering.

A showroom test proves nothing
In many African markets, your customers do not ride on smooth showroom roads. They ride on unpaved roads, broken tarmac, potholes and dust — often carrying a passenger or goods, every day. A scooter that feels fine on a flat road outside the factory can shake loose, fade under load, or wear out its brakes in weeks on the roads your customers actually use.
That is why the sample test matters more than the brochure. Before you order a container, ride the sample where your customers ride — and write down what happens.
Think about what is really at stake in this test. A sample is one vehicle, bought cheaply, that you are free to push hard and judge honestly. A container order is the same judgement made many times over, with your money committed and your name attached to every vehicle you sell. Every weakness the sample shows you on your own roads is a weakness you can raise with the factory while changing it is still possible — a different configuration, a different part, or a different model altogether. Every weakness you do not test for does not disappear; it simply gets discovered later, by your customers, one breakdown at a time, in the places where your reputation is made.
So treat the sample period as a proper test programme, not a quick ride around the block on the day the sample arrives. Plan the routes before the sample lands. Decide who will ride it — ideally including a rider who uses a scooter the way your customers do, every day, not only your most careful staff member. Decide how you will record what happens: a notebook or a simple form, photographs, and notes written the same day, while the ride is still fresh. A test you did not write down is a test you cannot send to the factory, and a test you cannot send to the factory changes nothing.
One more decision to make in advance: test the sample in the configuration you actually intend to order. If you test one battery and order another, or test the sample unloaded and sell the model for carrying work, you have tested a scooter your customers will never ride. The configuration, the load and the roads must all match your real market — that matching is the whole value of the exercise.
Test on your roads, not the factory's road
- Ride your real routes. Include an unpaved stretch, a potholed stretch and the steepest road your customers use regularly — not just the flat road near your shop.
- Ride with a real load. A passenger, or the goods load your customers typically carry. An empty scooter tells you almost nothing about a working scooter.
- Ride after rain, if you can. Wet, muddy sections show up weak brakes, poor grip and electrical problems that a dry-day test hides. Ask the factory, in writing, what dust and water protection the exact model has — do not assume a rating that is not on the specification sheet.
- Record real range on that ride. Do the battery maths first — capacity (Wh) = voltage (V) × capacity (Ah) — then record what the sample actually delivered on your roads, with your load. On the Lubon LB-CS, the listed figures are a 1500W motor, lithium / lead-acid battery options (for example 60V/72V, 32Ah) and a listed top speed of 45 km/h — confirm the rated and peak power, the torque and the range test conditions for your exact configuration, in writing, before you order.
Build your test route deliberately, the way you would build a checklist. Start with the route your typical customer actually rides most days — the road from home to the market, the shop, the school run or the delivery round your riders repeat all week. That ordinary route matters more than an extreme one, because it is where the scooter will spend its life. Then add the hardest stretch your customers use regularly: the unpaved section, the broken tarmac, the potholes, the steepest climb on their normal round. Regularly is the key word. You are not looking for a road that destroys any scooter; you are looking for the worst road this scooter will meet every week, because that is the road that decides whether your customers are still happy in six months.
Ride the route more than once, and not only on the first day. A single ride tells you how the scooter feels new. Riding the same route repeatedly over the sample period tells you what loosens, what fades and what starts to rattle — which is the information a dealer actually needs. Note the small changes: a switch that feels looser, a panel that has begun to buzz, brake feel that is not quite what it was on day one. Small changes on a sample, found early, are the early warning of the complaints you would otherwise meet at scale.
The load test deserves special care, because it is the test most often skipped and most often regretted. Ride with a passenger if your customers carry passengers, or with the goods load your customers typically carry if the scooter is a working vehicle. Watch how the scooter pulls away, how it climbs the steep stretch on your route, and how it brakes coming back down with the load on. Ask yourself the dealer's question, not the rider's question: could my customer do a full working day like this, every day? And record the answer honestly, with notes, rather than relying on the rider's general impression at the end of the day.
On range, keep your recording simple and honest. Start the ride with the battery charged using the supplied charger — on the Lubon LB-CS the listed charging time is 4–6 hours; confirm it for your exact configuration — and on the Lubon LB-CS the listed delivery time is 15 days, which you should likewise confirm for your exact configuration and quantity before you order. Then record the distance covered, the load carried, the kind of roads ridden and the state of charge at the end. Do the battery maths first so you know the size of the battery you are testing: a 60V, 32Ah battery holds 60 × 32 = 1,920 Wh on paper, and a 72V, 32Ah battery holds 72 × 32 = 2,304 Wh on paper. Your road record is what tells you what that paper figure means on your roads, with your load — and it is your road record, not a figure from a brochure, that you should use when your customers ask how far the scooter will take them. If the sample's real-world result falls well short of what you expected, that is a question to raise with the factory in writing before the order, together with the exact conditions of your test, so the factory can answer against the same facts.
A common mistake is testing only in the dry and only in daylight. If your sample period allows it, ride after rain and ride at dusk as well. Wet and muddy sections show up weak brakes, poor grip and electrical problems that a dry-day test hides, and an evening ride is when weak lights and a dim display stop being a detail and become a safety problem for your customer. If the weather does not cooperate during your sample period, say so in your notes — and confirm with the factory, in writing, what the exact model's dust and water protection is, rather than assuming protection that was never tested and never stated.
What rough roads shake loose
After the rough-road ride, check the sample closely:
- Fasteners and panels — anything that rattled, loosened or cracked on the unpaved stretch will do the same for your customers, faster.
- Cables and connectors — routing that rubs, hangs loose or traps dust and mud is a future electrical fault.
- Lights, indicators, horn, display and switches — test every one after the ride, not before it. Small electrical faults are the most common first complaint, and rough roads create them.
- Brakes and tyres — the parts that wear first on rough roads. Note brake feel after repeated stops with a load, and ask which brake and tyre parts are on the factory's spare-parts list.
Do this inspection the same day, while the dust of the ride is still on the vehicle — literally. Where dust and mud have collected is evidence: it shows you the places the road reaches on this scooter, and those are the places to look closely. Work over the vehicle in a fixed order, top to bottom, so nothing is skipped: panels and fasteners first, pressing and listening for movement that was not there before the ride; then cables and connectors, looking for routing that rubs against a moving part, hangs loose, or sits where it will trap dust and mud; then every light, indicator, the horn, the display and every switch, tested after the ride and not before it, because a switch that worked in your yard and fails after ten kilometres of potholes has told you something important.
Brakes need more than a glance. During the ride itself, note the brake feel after repeated stops with a load — not one stop outside your shop, but the tenth stop of a loaded run, on the rough stretch, when the brakes have been working. Note whether the feel changes, whether the vehicle pulls to one side, and whether stopping distances feel longer than they did empty. Tyres, too: look at how they have handled the unpaved stretch, check them again after the loaded ride, and ask the factory which brake and tyre parts for this exact model are on the spare-parts list, with prices, before you order — because on rough roads these are not parts you might need one day, they are parts you will need, and the only question is whether they are already on your shelf when the first customer needs them.
Keep the findings in a form you can act on. For each item, write one of three decisions: passed, failed, or must change before the main order. "Must change" items are the heart of the sample process — a part to be specified differently, a check to be added, a spare to be included — and each one should be specific enough that the factory can confirm it in writing. A note that says "brakes not great" cannot be confirmed or fixed; a note that says what the brakes did, on which stretch, with what load, can.
Dust is a test, not a detail
Dust gets everywhere a scooter works in a dry season. After your test rides, look at where dust has settled around the battery connector, the controller area and moving parts, and ask the factory, in writing: what protection does this exact model have, how should dealers clean and check these areas, and which of these parts can be replaced from the spare-parts list? On the Lubon site, spare parts sit in their own Spare Parts category — confirm the written parts list, with prices, for your exact model before the main order, and order the first wear parts with the vehicles, not after the first breakdown.
Treat dust as a long-term test as well as a daily nuisance. During the sample period, clean the scooter the way your customers or your workshop realistically will — not with special equipment your market does not have — and note whether the areas around the battery connector, the controller area and the moving parts can actually be reached and cleaned by a dealer. A scooter that can only be kept clean with tools your customers do not own will not be kept clean, and dust left sitting in connectors and moving parts is tomorrow's electrical fault and tomorrow's worn part. Ask the factory, in writing, how dealers should clean and check these areas on this exact model, and how often — and if the answer relies on equipment or products, confirm whether those are realistically available in your market before you accept the answer.
Build your first spare-parts order out of your own test findings. The parts your rough-road and dust tests pointed at — the brake and tyre parts that wear first, the switches and lights that rough roads shake into faults, the connectors that sit in the dust — are the parts your first customers will need first. Ordering them with the vehicles, from the confirmed written parts list, means the first breakdown in your market is a same-week repair done by you, instead of a scooter standing idle while a part crosses an ocean. That difference, repeated over your first year, is most of what separates a dealer customers trust from a dealer they warn each other about.
Decide in writing
Write down what passed, what failed, and what must change before the main order — and send it to the factory. A sample that fails honestly on your roads is a success: it just saved you a container of scooters your customers would have returned.
Send the factory a report it can actually answer: the routes you rode, the load you carried, what passed, what failed, and the specific changes you are asking for before the main order — each one to be confirmed in writing, for your exact configuration. Include the points this guide has flagged throughout: the rated and peak power and the torque, the range test conditions behind any figure you are quoted, the dust and water protection of the exact model, the cleaning and checking guidance for dealers, and the written spare-parts list with prices. Keep your test records with the sample file afterwards, too. When the main order arrives, those notes become your arrival check — the standard the delivered vehicles have to match, on your roads, before they go to customers.
And if the sample passes? That is a decision to write down as well, with the configuration you tested named exactly, so that the order that follows is for the scooter you tested — not a similar one.
Selling electric scooters in Africa? Tell us your country, your road conditions and the load your riders carry, and we will confirm the matching configuration, battery and sample terms in writing before quotation. Email: saravehicle@jxlubon.com · WhatsApp: +86 189 7035 3905
